Globe Overlocker Instruction Manual10/22/2021
Unthreading NeedlesThis is one of the most common problems you will come across, and it can happen to one or both of your needles. Overlock sewing machines can be quite tricky to use in the beginning, but with a little knowledge and understanding, you can avoid many of the common frustrations.Let me share some handy tips for troubleshooting the most common issues that happen when you are new to using an overlocker. You need to make sure you thread your overlocker in order according to the manual.When you are new to using your overlocker or serger, you can come across problems that, without understanding how to fix them, may grind your crafting to a halt.This foot also helps to ensure that the fabric remains straight and the blade can cut it off correctly. If this is happening, it could be that you forgot to lower the presser foot.The presser foot is there to keep the fabric in place while you to stitch it. Fabric Not Staying StillAnother common issue is that the fabric keeps jumping or shifting when you try to stitch. The important thing is to not worry more than necessary about this.You need to make sure before you begin to stitch that you thread the needle with a few inches of thread on the other side of it – a tail, if you like. You need to keep in mind that the needle is going to move up as it starts to sew so there needs to be a tail of thread that is long enough to not pull out when the needle moves up.CraftyMummy Tip: I often use my overlocker tweezers to pull the thread through at the back where it is hard to get my fingers in.
![]() ![]() ![]() Globe Overlocker Instruction How To Fix Them
0 Comments
Leave a Reply.AuthorMichael ArchivesCategories |